Serge NCOM by Random*Source

Random*Source Documentation

build notes: 

you have the 4.7v zener diodes for circuit protection so you use 1 10k resistor where it says 10k

please look at the 3 legged transitors and make sure you put the 2x 3904 , 1 LM317LZ .	1  LT1009C  in the right place.
 
I have given you a 220p styroflex capacitor to use in the 47p location, as suggested by random*source

In the bead location, you will use resettable fuses.

Omit r18 as marked

1 of the 330R resitors is marked RS on the PCB


Calibration Video coming very soon.